We’ve teamed our amazing Energy Mat with our new Next Generation Elite powder to create the latest and best kit for making purified Elite Water! Working together, these two are amazing!
How to make your water:
Follow the instructions for making the Next Generation Elite Water Below:
Simple Shungite Water Instructions:
-
Carefully add approximately 1/8th – 1/4 of a teaspoon of powder into a glass container of 1 litre of water. The ratio may vary depending on the degree of contamination of the water.
-
Fill the container with the desired amount of water and seal it.
-
Mix well by inverting or stirring the bottle twice to pass the powder through the water. You will see a Vortex created when you stir it; this adds to the benefits. If possible, use spring or filtered water.
-
Put the Shungite Powder in first, then fill the container with water. Shungite will float on the surface if you put the water in first.
-
Set aside for at least a day. It is advisable to turn and or stir the glass container several times during this time.
-
After that, strain the water through a cloth to separate the powder from the water, and you will have the most advanced Shungite Water. You can also consume the powder according to the Manufacturers.
-
The water is now ready to be consumed.
2. Advanced Shungite Water Instructions.
-
Carefully open the capsules and then add the contents into a glass container at the rate of 1 capsule to 1 litre of water. The ratio may vary depending on the degree of contamination of the water.
-
Fill the container with the desired amount of water and seal it.
-
Mix well by inverting or stirring the bottle twice to pass the powder through the water. You can create a vortex when you swirl the water, which is even more beneficial! Spring or filtered water is best to start with, if possible.
-
Put the Shungite Powder in first, then fill the container with water. Shungite will float on the surface if you put the water in first.
-
Next, put it in the refrigerator upright and let it stand for up to 24 hours. It is desirable to maintain a temperature of about +7°C, corresponding to the maximum solubility of C60 fullerenes in carbon disulphide (CS2).
-
After that, you can, if you want to, strain the water through a cloth to separate the powder from the water. It isn’t necessary, and the Manufactures don’t state that you need to, but you will have some powder left at the bottom if you don’t do this. You can also consume this powder too! At the end of the process, you will have the most advanced real Shungite Water available.
-
Before drinking, it is advisable to heat the water to a temperature above 46.24° C (the boiling point of carbon disulphide CS2).
-
The water is now ready to be consumed.
- This method structures the purified water and retains all elements beneficial for the body but removes suspended solids: chlorine, oil products, iron and heavy metal ions, surfactants, organic compounds, nitrates, phosphates, ammonium salts, and radionuclides.
Once you have made the water, we suggest placing the container on the Energy Mat and leaving it there for approximately 20 minutes.
That’s all you need to do, and you will have the best-tasting and purest Shungite water available!